Hydron Brackish Membrane 4" x 40" 2771 GPD @ 100 psi

This Membrane is Tested and Certified by NSF International against NSF / ANSI Standard 61 for material requirements only. COMPONENT A = 40" B = 3.9" C = 0.75" D = 1.05" (1016 mm) (99.7 mm) (19.1 mm) (26.7 mm) (3.6 m3/hr) MEMBRANE TYPE TESTING CONDITIONS EXTREME OPERATION CONDITIONS › Max. Working Pressure › Max. Feedwater Flow › Max. Feedwater Temperature › Max. Feedwater SDI › Single Membrane Max. Pressure Drop › Residual chlorine Concentration of Feedwater › pH Range of Feedwater during Continuous Operation › pH Range of Feedwater during Chemical Cleaning Testing Pressure Temperature of Testing Solution Concentration of Testing Solution (NaCl) pH Value of Testing Solution Recovery Rate of Single Membrane Element 2~12 3~10 600 psi 16 gpm 113 °F 5 15 psi <0.1 ppm 100 psi 77 °F 500 ppm 7.5 15% (45 °C) Polyamide Compound (0.69 MPa) (6.9 bar) (25 °C) (0.1 MPa) (1.03 bar) (4.14 MPa) (41.4 bar) › › › › › HYDRON Commercial Membrane Elements with their hard shell   berglass exterior provide outstanding performance for commercial systems. HYDRON Membranes are manufactured in a State-of-the- Art, ISO-9001-2000 certi  ed automatic rolling facility which provides you with a precise and advanced membrane element. HYDRON Membranes not only deliver an attractive cost to bene  t ratio, but also gives you a membrane that has consistently high quality and performance. HYDRON Commercial Membrane Elements can be used in a variety of applications, such as car wash, bottling, manufacturing, water stores, food processing, and many other applications where a reliable, performance membrane is needed.